The drum unit of a printer is a cylindrical device that transfers the toner powder from the ink cartridge to the printer. Brother Printer drum unit replacement is an integral part of printer maintenance. When the Drum unit stops working after its life cycle is complete, the toner won’t be able to function properly and the printing tasks will stop. When the Brother printer drum unit has crossed its lifecycle of the total number of prints, you will need to replace replace drum Brother printer with a new one
Follow the steps below to replace drum unit brother printer
- To replace Drum Brother printer, turn on the printer by pressing the power button. Do not try to replace the drum unit if the printer is turned off
- With the printer turned on, press the clamp on the door of the printer to open the front door of the Brother printer
- In most of the printers manufactured by other brands, the drum unit and the cartridge are separated. The toner cartridge is attached to the drum unit assembly on Brother printers. For brother drum unit replacement, take the Drum unit out along with the toner cartridge of the printer
- You will see a green-colored lever on the front of the Drum unit, Push the green level to separate the toner cartridge from the drum unit.
- Take the toner cartridge out from the drum unit and keep it safe separately
- Take a new drum unit brother printer and place it on a table
- Insert the old toner cartridge into the new drum unit. Press the green level once to fix the cartridge with the drum unit
- Install the toner cartridge and drum unit assembly back to its place inside the Brother printer.
- Close the cover of the Brother printer
In just 9 easy steps you can successfully complete the Brother printer drum unit replacement. Keep the new Brother printer drum unit ready whenever you are changing the drum unit. If you need any help to fix the issue, you can call Printer Touch now and get the required help