Canon Printer Showing Support Code Error can be a very small glitch or it might be the case that the printer chip is not working. If a support code is displayed on your Canon printer, you can use any of the methods described in the blog to fix the problem.
Method 1- Change the Chip to fix the Support Code Issue
Before you try to fix the issue, check the printer screen if the printer support code is displayed, use the steps below to fix the problem.
Step 1– Use a screwdriver to remove the screws on the back side of the printer.
Step 2– Take out the cover from the printer.
Step 3– Slide out the cartridge from the printer.
Step 4– Remove the screws as shown in the image below.
Step 5– Remove the fitting. There will be a chip inside it. You need to change the chip. You can purchase the chip from a parts and services store.
Step 6– Replace the chip and put the component in its place and tighten the screws. You can fix the problem of “support code is displayed” on the Canon printer after changing the chip of the printer.
Method 2- Reset to Fix Canon Printer Showing Support Code Error
If you tried the above method and you see the Canon support code is displayed, use this second method to reset the Code error.
Step 1– Press the power button to turn off the printer.
Step 2– Press and hold the power button. At the same time, press the stop button 4 times.
Step 3– The support code issue on the Canon printer you are using will be reset after the light has stopped blinking.
You can try to reset the printer if the Canon Printer Showing Support Code Error. If the printer support code is displayed on the printer even after resetting it. You can change the main chip inside the printer. From this blog, you can learn how to open a printer and change the printer chip. While performing the chip change, you will need the guidance of a printer expert and we are there for you. Get in touch with Printer Touch now. Our Printer experts will guide you through the process.