HP Error Code E8
E8 is one of the very common HP printer issues for HP LaserJet printers. This warning message signals a problem with your printer’s scanning carriage. The issue in question could be software-related or it could be caused by a glitch with the scanner motor.
How to solve HP Error Code E8
First, check that your HP printer software and firmware are current and updated
Your printer is very likely to be facing a hardware problem if the error e8 occurs again
There is an HP cartridge problem. The issue should be resolved quickly by taking out the ink cartridge and thoroughly cleaning all of the printer rollers. The key to avoiding HP printer error E8 is to maintain and clean the hardware.
HP printer error code 61011bed, or 0x61011bed
One of another common HP printer issues is the printer error code is error 61011bed, or 0x61011bed. Both of the error codes are a part of the HP cartridge problems. It can also be an HP printhead problem. This suggests that there is an issue with your HP printer’s print head. It might also happen when you attempt to line up the ink cartridges.
How to solve HP error 61011bed
- After removing the ink cartridges, thoroughly clean the printer head. Proceed to the following step if the HP cartridge problem still persists
- Reinstall the HP printer’s ink cartridges, then begin the print job again.
- To ensure that the printer and computer are communicating correctly, update the printer drivers.
- Use the RegAce System Suite registry cleaner to clean the registry after installation.
- If none of the above solutions work, contact Printer Touch HP support
Printer in Error State
A frequent mistake that occurs while emailing a document for printing is one of these HP printer issues. The error notice suggests that the printer is either not connected to your computer correctly, is off, or is not connected to the internet. This can also be caused by an HP cartridge problem. Your HP printer may be experiencing a short supply of paper or ink, which could be another cause of the general error condition.
Solutions to Printer In Error State
- Verify that the printer is powered on. Restarting your computer and printer is another option.
- Confirm whether the printer has connectivity to your WiFi network and computer.
- Ensure that your printer is stocked with ink and that the paper tray is loaded.
System Error 0FXXXX
System Error 0FXXXX is a part of the system error of HP printer issues
Solution
- Using the main power switch on the back of the printer, turn off the printer.
- Disconnect the data cable from the printer
- Turn on the power
- Scroll to the “Printer Setup Options” icon and press the Enter key.
- Scroll down to find “Utilities” and press Enter.
- Find the “Test Print” option and press Enter.
- Scroll to any of the selections and press Enter to start the print.
- Internal printer functionality has been demonstrated if no errors show up. Diagnose and fix issues with the data connection, the operating system (OS), the software being utilized, and the file that is printing.
System Error 0C0040
System Error 0C0040 is one of the major HP printer issues related to HP printhead problems. There has been a printhead drop detection error. When the printer notices that the same nozzle regions are not functioning properly in various printheads, an error code occurs.
Solution
- Using the main power switch on the back of the printer, turn off the printer.
After ten to fifteen seconds, flip on the main power switch. - If no error appears, attempt to verify printer functionality.
If the error re-appears continue with the remaining steps.
- Try to retrieve the printheads by hand.
- Press Enter after swiping to the Printhead menu icon, which is located in the lower right corner of the front panel display.
- Press Enter after using the Arrow keys to scroll to Recover Printheads.
- Re-cover the offending printhead(s) to get rid of HP cartridge problems
- Try checking the printer’s operation by printing a test print page
If there are HP printer issues you are facing that are not listed in the list of errors and issues, You should get a technician to fix the issue. Contact Printer Touch HP support to fix your printer without wasting your time and energy.
