Konica Minolta Printer Paper Jam

Kinoca Minolta Printer paper jam is one of the most frustrating issues of a printer manufactured by Konica Minolta printer. No, it is not a manufacturing problem, it is a problem caused mostly when the printer is in use and some paper shreds get attached to the printer parts and are not able to get out of the printer. Konica Minolta jammed paper is easy to take out. It just needs proper care while the issue is fixed. In this discussion, we will tell solutions for Konica Minolta Printer paper jam and we will also let you know How to avoid it.

How to avoid Konica Minolta Printer Paper Jam

It is always better when you look to avoid certain printer issues when it can be if you take proper care and do timely maintenance of the printer. Such printer issues can easily be identified and avoided. Below are some things you can keep in mind to fix the Konica Minolta copier paper jam.

1. Only use the correct dimensions of the papers inside the printer. Always use genuine papers that are manufactured by a good manufacturer or recommended by Konica 
2. To avoid Konica Minolta Printer Paper Jam, carefully align the sheets of paper in the tray and ensure that it is not too full. Adjust the paper guides so that they fit firmly and snugly with the paper stack without distorting or harming it in any manner.
3. Place a suitable volume of paper in the tray. Overfilling the paper slot raises the probability of future Konica Minolta printer paper jams.
4. Take a cloth that is damp and free of lints and regularly clean the print rollers. Cleaning the print rollers increases their friction.
5. Use compressed air to blow away dirt and other particles from your printer. The specks of dirt accumulate inside the printer and the paper is not able to get in or out of the printer.

How to Fix Konica Minolta printer paper jam

Carefully follow all of the below steps to solve the Konica Minolta printer paper jam. Do not skip any of the steps. If you need guidance in fixing Konica Minolta jammed paper, you can call Printer Touch now and our executive will guide you through the process.

1. Close all the documents opened in the computer and turn it off along with your Konica Minolta printer
2. Remove the power plug of the printer from the source of power
3. Remove the paper from the paper tray take the tray out of the printer and keep it aside 
4. Open the doors of the printer
5. If the printer has extra doors in the back, open these doors too 
6. Take a flashlight or use a torch to look inside the printer. There can be tiny pieces of paper inside the printer which is the reason behind Konica Minolta Jammed paper 
7. Look into every place where the paper can get caught like inside the roller, into the paper path, etc. 
8. If you see any paper, take a plucker or use your hand and take out these papers. Use extra precautions to not tear the paper again when you are fixing the Konica Minolta copier paper jam
9. If any piece of paper is shredded in the printer, you must take every piece of it out of the printer.
10. Take the cartridges one by one and inspect them. If there are ink cartridges that are dry or have a low amount of ink, you need to replace these cartridges with new ones
11. After you have taken out Knoica Minolta jammed paper, you need to check the rollers. 
12. Take a damp cloth and wipe out the rollers to improve its efficiency to hold the paper coming and going out from the printer. 
13. There may be dirt inside the printer. Remove all the dirt from the printer. You can take a small vacuum cleaner and run it to remove the dirt.
14. Place the cartridges inside the printer and when you are done fixing the Konica Minolta printer paper jam, you need to keep everything in place and then close all the doors opened in the process.
15. Turn the printer on and print a page to test if the Konica Minolta Copier paper jam is fixed or not 
16. If the jam is not fixed, you need to update the firmware on your Konica Minolta printer
17. Turn on the computer and visit the Konica Minolta website on Google Chrome.
18. Look for the “Downloads” section and click on it 
19. Look for your printer model no and then click on it when found 
20. In the next step, choose printer firmware and click on download 
21. When the file is downloaded, run the installation file and the firmware will be updated.

When the printer firmware is updated, The Konica Minolta Printer paper jam will be fixed.