Samsung Printer Code Errors And Messages

Samsung Printer Code Errors and Messages are messages that get displayed on your printer if the printer is having issues. Every printer issue that happens with the printer has been assigned a different error code. These codes can vary depending upon the printer model but error codes for most common Samsung Printer Code Errors are the same for every Samsung printer. If you want to fix Samsung printer printing errors, you need to go through this blog. This descriptive blog makes sure that even a novice is going to solve these printer errors without any guidance from printer experts.

Roller issue Samsung Printer Code Errors

If your printer is displaying a message about a print roller issue, there might be an issue with the printer roller. Either there is dirt accumulated inside the printer or the Roller has dried out and is not able to hold papers.

Solution

It is very easy to fix Samsung printer printing errors related to the printer roller. Follow the simple steps as outlined below.

1. Cut the power supply to the printer
2. Open all the access doors of your printer after removing the paper tray
3. Check inside the printer for dirt
4. If there is dirt accumulated near the rollers, clean it 
5. Additionally, look for shreds of paper being stuck in the print rollers
6. If there are any pieces of paper, take them out from the printer
7. Take a lint-free cloth, slightly moist it with some water, and clean the rollers
8. Cleaning the rollers will improve their friction and will be able to hold papers properly
9. Close the doors opened during the process and connect the printer to the power source
10.  Samsung Printer Code Errors related to print rollers are most likely to be fixed if you have followed each and every step as described above.

Ink System Failure Fujitsu Printer

The printer’s ink system seems to be malfunctioning, as indicated by Fujitsu Printer Code Errors and Messages pertaining to the cartridge. The ink system failure Fujitsu printer may be caused by closed nozzles or an issue with the ink cartridges. 

Solution 

1. First, turn off the printer and cut the printer’s connection from the power socket
2. Remove all the printer ink cartridges from the printer and keep them in a towel
3. Inspect all of the Cartridges. Check if the carriages are leaking any ink
4. If there is a leak of ink from the ink cartridges, you then will clean the printhead of the printer
5. Printheads of Samsung printers can be cleaned either manually or automatically. 
6. To clean the printer’s printhead automatically, use the Fujitsu printer software. 
7. Go to the start menu and search for “Samsung printer software”
8. when the results pop up, click on the program to open it
9. Click on the menu and go to the maintenance section by clicking on it
10. Locate the printhead option and then click on “Clean printhead”
11. The printhead cleaning will commence and see if the “Ink System Failure Samsung Printer” is fixed or not.
12. You must leave the printer to allow it to completely clean the printhead. 
13. If the maintenance option is not available in your printer software, follow the instructions below to complete it manually.
14. Open all of the doors that the Samsung printer has, open the front door, document tray, and rear doors
15. Locate the printhead and take it out from the Samsung printer
16. Take a bowl of water and dip the printhead inside it 
17. Take the printhead out, if it still has ink on it, repeat the step of soaking the printhead 
18. Repeat the steps until there is no ink left on the printhead 
19. Wait for the printhead to dry completely and then put the printhead back inside the printer 
20. Samsung Printer Code Errors and Messages will not show up on the printer screen after the issue has been fixed.

Bad quality printing from Samsung printer

There are a lot of Samsung printer code errors and messages that reflect bad quality of printing. These issues can be caused by settings changes or because of ink and toner cartridges being low on fluid.

Solution

To fix Samsung printer printing errors related to bad printing, you first need to change the print quality.

1. Open the Samsung printer software 
2. Go to the Printer settings
3. Click on the print quality
4. There will be an option to choose the print quality 
5. Set it to the highest resolution available and then click on “Apply” to confirm 
6. If the printer still displays Samsung Printer Code Errors, you will need to check the ink level of the toner
7. Open the print covers
8. Take out the ink toner 
9. Clean it with a towel
10. Check the ink levels and replace it with a new toner cartridge and then put it back inside the printer.

Samsung Printer Code Errors and Messages related to bad print quality will be fixed.