+1-844-460-2008An unclean print roller or unaligned sheets of paper are the main reasons behind Brother ADS paper feed problems. This issue can become very common if you use bad-quality or torn papers. However, there could be other reasons behind the issue, and you need to look into the printer to find the real culprit. In this blog, we will guide you through the process of Brother scanner roller cleaning and fixing the paper feed problems caused by it.
Step 1– To fix the issue of the Brother scanning multiple pages, first turn the power off and then unplug the power cord from the back of the Brother printer.
Step 2– Brother document feeder maintenance is very necessary, you need to clean the feeder regularly. First, take out the document feeder or paper tray.
Step 3– Brother scanner roller cleaning is required in some cases to fix the Brother ADS paper feed problems. Take a dirt-free towel and clean the rollers and the inner parts of the printer as shown in the image below.
Step 4– Brother scanner paper jam can become very common if the paper in the tray is not properly aligned. Take out the bad papers and align the rest of them in the paper tray.
Step 5– You can also do the ADS-2700W skew correction, but it is not required in this case. Place the paper tray back into the printer.
Step 6– After the ADS-2200 document alignment is done, plug the power cable back into the printer and switch on the supply to check if the issue is fixed or not.
If you’re still dealing with Brother ADS paper feed problems even after cleaning the rollers and aligning your documents, there might be deeper issues with the feeder mechanism or internal sensors. Proper Brother document feeder maintenance usually resolves most scanning problems, but sometimes expert help is needed. One of the best experts in the US is Printer Touch. Call Printer Touch at +1-844-460-2008
