Kyocera Printer Code Errors And Messages

Welcome to the world of Kyocera Printer code errors and messages. There are hundreds of printer code errors in Kyocera printers and one of these could appear on the screen of your Printer if you have not been maintaining your printer regularly. The error can also appear on the screen due to some simple random issue like a paper overlord. The Kyocera printer error code can easily be recognized. Among hundreds of error messages, we will discuss some of the common Kyocera printer code errors and messages that can easily be fixed on your own. Read this instruction guide to detect and solve Kyocera printer errors

Error code 1101

This Kyocera printer error displays on the printer screen when there is a failure with the authentication of the SMTP server. It pops up when you are trying to scan and send documents. 

Solution

The very easy solution to this is to check the server credentials 

1. Open the printer settings from the printer software
2. Go to connections 
3. Look for an SMTP server 
4. Confirm that the credentials are correct
5. Restart the printer for the changes to take place

Error Code C6000

It is one of the Kyocera Printer code errors and messages that will require professional help. It insists that the Heating roller thermistors are at abnormally low temperature

Solution

1. Disconnect the printer
2. Wait for 5 minutes before you switch on the printer again and check if the Kyocera printer error code is still displaying or not.

If the problem is still there, consider seeking proper guidance from a primer expert employed by Printer Touch. Our printer experts are experienced in helping you in such adverse situations.

Error Code 2202

This Kyocera printer error indicates that the network cable you are using to connect the computer has been disconnected.

To solve this issue, just check that all the cables used to connect your printer are all tightly connected and there is no wiring issue. Also, make sure that there are no cuts in the wires.

Error Code C6000

If you have been searching for “get my Kyocera printer out of error mode” due to the error code C6000, you will either be able to solve it or you will have to replace the fuser unit. This error on your printer indicates that the life cycle of the fuser unit has been reached.

Solution

1. Disconnect the printer from the power
2. Open printer covers
3. Take out the fuser unit
4. If the fuser unit looks fine, slot it back inside the printer
5. If the fuser unit has been overused, you will need to replace it with a new one

Error code R300

It is one of the most common Kyocera printer error codes and messages related to the print rollers. This Kyocera printer error indicates that there is a paper jam that is causing the roller to not work properly.

Solution 

1. Remove the paper tray from the printer.
2. Open the printer covers after disconnecting it from the source of electricity.
3. Look for papers in the feeding tray and check the rollers 
4. Try to rotate the rollers from your hand without applying extra power
5. If the rollers moved freely, check for any pieces of paper stuck inside the rollers
6. If the rollers have dirt in them, wipe it out with a clean piece of cloth
7. If the rollers are worn out, replace them with new ones
8. Cleaning the rollers with a slightly wet cloth can improve their hold on paper
9. Close the printer cover
10. Place the paper tray back and align the papers
11. Start printing again to check if the Kyocera printer error is fixed or not.

Error Code E1

The error code E1 is a common Kyocera Printer error related to ink toner. The error shows up when there is a non-genuine ink toner is installed in the printer. The issue can also arise when the toner is not slotted properly.

Solution

1. Open the doors of your printer.
2. Look for the ink toner 
3. Take it out of the printer
4. Buy a new toner and place the ink toner back into the printer 
5. Close the printer doors

Kyocera Printer Code Errors and Messages are a way to indicate that there is something wrong with the Kyocera printer. When such an issue arrives and you search for how to fix the error code on my Kyocera printer, the best thing to do is not to panic and contact Printer Touch. Printer Touch has been widely recognized as one of the best printer service providers. When you get your printer serviced with us, you do not need to travel to any printer store, you just have to call us and we take your printer online or guide you through the whole troubleshooting process. Do not go anywhere else in such a situation, give us a call right away.