Samsung Printer In Error State

Samsung printer in error state is a result of different errors with your Samsung printer. There can be a number of reasons for this but in this blog, we will only focus on Solving this Printer error on Samsung printers. Experts at Printer Touch have been working in the printer industry for years and this blog has been made with their help. We have described below two quick solutions for the Samsung Printer in error state. You should read the full blog and determine what fix you can apply according to your situation. You can try out both the solutions.

Solution for Samsung Printer in error state

Follow the instructions below to fix the Samsung Printer in error state. The process is very straightforward and easy to understand. It will take about 10 minutes to complete the process and the Printer error on Samsung printer will be fixed.

1. Check that your computer or whatever device you are using to send print instructions is connected to your Samsung printer.
2. If the printing device you’re using is wired, make sure to thoroughly inspect the wiring. Remove the wires if you see any tearing in the wire. 
3. if a wireless connection was used to set up the connection. Verify again that the computer and printer are connected to the very same wireless network.
4. Go to the Start menu to see if there are any printer error on Samsung printer.
5. Open the first result that displays the control panel’s logo and content by searching for it.
6. The computer will display the devices that are connected when you locate the “hardware and sound” option. 
7. Click on the option of “View devices and printers” in the following step. 
8. Choose the Samsung printer. 
9. Examine the condition of your printer. You can use the bottom bar to check the status of your printer.
10. When the status indicates “ready,” the printer has been connected to the computer and is ready to receive commands.
11. Restarting your printer when the check is complete may help resolve the Samsung Printer issue by cleaning out sporadic glitches and renewing the operating system.
12. The ink or toner you are using, as well as the quantity of paper in the paper tray, could be potential causes of a printer error on Samsung printer.
13. Take off the covers of the printer. 
14. Take out the ink cartridges from the printer and check how much of the ink is still left inside the cartridges.
15. After inserting all of the cartridges with high ink levels into their designated slots, remove the ones with low ink levels.
16. Purchase fresh cartridges and replace them. 
17. Fill the paper tray with adequate paper.
18. To see if you still need to search for “get my Samsung printer out of error mode,” turn on the printer.

Alternate Solution to fix Samsung printer in error state

If the First solution to fix the Samsung printer in error state did not work out for you, you do not need to again go back and search for “Get my Samsung printer out of error state”. We have an alternate solution ready for you. The steps below will tell you how to restart the print spooler, download the latest printer software, and fix printer error on Samsung printers. Carefully read all the steps and do not try to cut time by skipping any of the steps mentioned below.

1. Pressing the Windows and R keys simultaneously will bring up the Run dialog box.
2. Click the “Run” button in the window after typing services.msc into the blank search field.
3. Locate “Print spooler service” in the list, pick it, and then enter its properties.
4. Select “Automatic” as the startup type from the menu’s startup type option.
5. Resume the print spooler services by clicking stop and then resume after a 30-second pause, if you have it set to automatic.
6. Select Apply and then click on “ok”
7. Close the window 
8. Restart the computer
9. Turn off the power to the Samsung printer.
10. Use the Windows start menu to access the control panel.
11. Toggle between “Devices and printers.”
12. In order to fix the Samsung printer issue, Make your Samsung printer selection.
13. Select “Remove device.”
14. A pop-up window will show up; select “OK” to proceed.
15. The computer will be fully disconnected from the Samsung printer.
16. Link the computer and printer together using the exact same WiFi network
17. The printer’s drivers will be found and downloaded by the computer. You can also download the software from Samsung support.

Next time you land into a situation of Samsung printer in error state. Do no search for “Get my Samsung printer out of error state”, just go through the blog and deal with the situation accordingly. You can further get in touch with Printer Touch for support related to Samsung printers.