Tally Printer Setup Issue

Taly printer setup issue is caused when you are not able to completely set up the tally printer on your computer. There are a numerous number of reasons for the tally support printer setup not working. Here is a list of some of the most commonly known reasons for the Tally printer setup issue

1. The connection between the printer and the computer is not secure. You need to change the tally printer security settings in such cases 
2. The wireless connection you are using might be insecure or using a different bandwidth than your printer causing the issue of the tally printer wireless setup not working
3. The USB ports on the computer are not in good condition which is why your computer may not be able to recognize the tally printer  resulting in a tally printer setup issue.

Tally support printer setup

When in a situation where the tally printer wireless setup not working, you will not be able to set up or connect the printer with the wireless network you are using 

Delete the connection

1. Open the settings from the home screen of the tally printer 
2. Go to the network and connection settings where you will be able to see all the networks your printer has been previously connected to 
3. Select the network you are using right now and click on “Forget network”
4. The network connection of your wifi router that was being used to connect the printer to the internet will be deleted 
5. To fix the tally printer setup issue, follow the next steps of setting up a new connection

Setup new wireless connection 

Setting up a new connection on the tally printer is the next setup to solve the issue of the tally printer wireless setup not working. Follow the steps below to set your wireless printer correctly

1. Open the settings from the touch screen of the printer 
2. Got to network settings
3. Click on the Wireless connection
4. Select the network you are opting to connect to 
5. Enter the wifi password and click on connect to connect to the network

Tally Printer Security Settings

Sometimes Tally Printer Security Settings or the privacy settings on the printing machine or connection may result in an assortment of configuration complications that prohibit you from connecting or operating the device properly. Below is a full guide for effectively dealing with these potential concerns and guaranteeing a smooth setup process for the tally printer

1. Make sure that the Windows firewall is not blocking the allowance of your printer to connect to the computer and the network.
2. If it is blocking the printer from connection, go to the firewall option on the computer and add the IP address of the Tally printer to the exception list of the Windows firewall 
3. Disable 
4. Ensure that your firewall is not blocking the printer’s connection. Add the printer’s IP address to the firewall’s whitelist.
5. Go to the start menu and click on the antivirus program you are using on your personal computer.
6. Inside the application, either block the antivirus from Tally printer security settings or disable the antivirus temporarily 
7. After the Tally support printer setup is done successfully, enable the antivirus again.

Tally Printer Wireless Setup Not Working

Wireless tally printers are very easy to use and the latest printers from Tally have made it much easier to connect the printer to the wireless network but still, sometimes the issue of the Tally printer Wireless Setup network not working comes up. Try to fix the issue by following the solutions ag given below. 

1. Go to your printer’s settings menu.
2. Select ‘Wireless Setup’ 
3. Click on “Add a network”
4. The device will automatically search for a wireless network to use
5. Choose the network you are willing to connect to
6. Enter the correct credentials before you hit “ok” and connect to the network
7. If the printer is still not able to connect to the network, you will need to check if there is the latest firmware update available for the device you are using. Follow the next steps to download the latest firmware update.
8. Go to the tally website 
9. Click on the “Downloads” menu
10. Select the printer model of your tally printer 
11. If there is a firmware update available, it will show up on the webpage 
12. If there is a firmware file ready to be downloaded, click on it 
13. Choose the location to save the file and click on “Ok”
14. The firmware will be downloaded to your device
15. Go to the downloads folders and set up the new firmware update by following the instructions provided in the setup file of the firmware.

You can set up your tally wireless printer or tackle any Tally printer setup issue with this guide, if you are unable to setup the tally printer on your computer, contact Printer Touch now for immediate guidance and support.